Pharmaceutical Manufacturing

Radix Door Interlocking system is capable of Controlling up to 16 doors using single controller. It is a system which on request allows access to only one door for a predefined time and makes other door secure within the designated area. The system aids in minimizing the microbial, particulate contamination and helps maintaining pressure difference between rooms
Buzzer indicators are used to indicate manhandling of the doors and will not allow to do so. Door groups can be formed in 4/8 door interlocking system. User can program door groups using PC based utility through serial communication. Door locking time and opening time can also be set using utility. A no touch switch / touch keypad is provided at the entry side of each door for access. Cascading 2 Door interlock controller can let you add up to 16 Doors in one go.
Four Digital Inputs (DI)are provided for emergency door opening(e.g. through output of fire alarm system, or manual emergency door open switch). Two Digital Outputs (DO) are provided, they are relay outputs, and can be used to operate hooter etc.
Utilized in Pharma Industries, Formulation / API Laboratories / Clean room / Operation Theatre and elsewhere where pressure difference is maintained to a specific point.

Features

• Interlocking up to 8 doors using single door open sensor
• Cascading option can let you add up to 16 doors
• No touch switch/push buttons for opening the door with LED indication
• Provision for emergency key to release all or certain doors
• PC based utility for easy configuration of door lock time, door open time, inputs and outputs
• Pre-Settable time delay for door magnet release time
• Programmable door opening time (DOTL)
• Easy mounting arrangement for fixing on wall
• Easy and quick installation

Features

• Accuracy: Platinum RTD: ±0.6% @ 32°F (0°C);Balco RTD: ±0.1% @ 32°F (0°C);Nickel RTD: ±0.5°F @ 32°F (0°C);Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C)
• Operating Temperature: -32 to 240°F (-35.5 to 115.5°C)
• Probe Diameter: 1/4" (6.3 mm)
• Cable Length: 8"
• Probe Material: 304 SS
• Mounting: 1/2" threaded connection to fit IW2 Series Thermowell

• Item Code: SeriesI2-4

• Inputs : 0/4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 6-digit Rate Indicator, 8-digit Totalizer
• Four setpoints each assignable to either flow rate or totalizer
• Programmable flow rate, relay modes setpoints etc.
• Isolated 4~20 mA retransmission output
• Application : Monitoring and controlling continuous as well as batch flow processes
• Password protected programming & reset
• Programmable flow rate, setpoints and relay modes, etc.

• Item Code: FLT601